FB
Youtube

+386 31 869 623 info@ciprodukt.si
SI | EN | DE | DE(CH) | FR | HR | IT
FB Youtube

CI PRODUKT Ci solid

Ci solid system is the best approximate to classically built construction. The wooden construction is done with solid cross-glued boards (X-lam). With theCi solid system, we can build buildings with several floors. The external side of the walls is coated with thermal insulation and a facade, while the insides of the walls is coated with a MK coating. It is also possible that the wall remains visible, and the same is also true for the floor board. In cases of smaller quantities of installations, the installations are laid directly into the construction by means of milling, but in cases of greater branches of installations, an installation plane is prepared on which individual branches are installed, i.e. for electricity, sewerage, ventilation etc. The system is suitable for the construction of low-energy and passive residential and multi-residential buildings that are achieved with different insulation thicknesses, on the thermal envelope of the building and with suitable joinery.

The thickness of an external wall for a low-energy house is 31.5cm, and 41.5cm for the passive standard. 35–45cm of insulation is built in the roof. 

The INFORMATIVE PRICE until the partial-key phase with no installations for a low-energy house is €950 - 1000/m2 of living space. An addition for the passive standard amounts to €60/m2.

 

The partial-key phase with no installations, beside installation work, also does not included parquet, ceramics and interior doors. The KEY phase on request. The price includes 9.5% VAT.





The cross sections of structural assemblies in the case of a low-energy house: Ci solid

EXTERNAL SUPPORTING WALL: eco solid
Vapour-permeable facade layer 8mm
Wood-fibre facade board 60mm
Wooden sub-construction 160mm
Soft wood-fibre insulation in between 160mm
Cross-glued board X-lam 100mm
Wood-fibre installation board 60mm
Fire-rated drywall board 15mm
Thermal transitivity U= W/m2K, wall thickness =403mm, phase angle =, wood share up to.


SLOPING ROOF: Ci solid
Tile roofing 40mm
Rails 40mm
Ventilation duct rails 50mm
Wood-fibre DWD board 16mm
Rafter 220mm
Dropped timber frame  130mm
Cellulose insulation in between 350mm
OSB3 construction board 18mm
Fire-rated drywall board 15mm
Thermal transitivity U= 0.152W/m2K, cross section thickness = 529mm, phase angle = 18 hours, wood share up to 20%.

CEILING FOR THE ATTIC: Ci solid
OSB3 construction board 15mm
Collar tie 200mm
Dropped timber frame 150mm
Cellulose insulation in between 350mm
OSB3 construction board 18mm
Installation ductwork with aluminium substructure 150mm
Fire-rated drywall board 15mm
Thermal transitivity U= 0.153W/m2K, cross section thickness = 548mm, phase angle = 17.7 hours, wood share up to 20%.

Ci solid FLOOR BOARD
Ceramics, parquet 15mm
Quick-drying micro-reinforced flooring 40mm
System board with insulation 22mm
Hard stone wool 40mm
Cross-glued board X-lam 160mm
Dropped aluminium substructure 150mm
Drywall board 12,5mm
Cross section thickness = 440mm


Ci solid INTERNAL LOAD-BEARING  WALLS
Drywall board 12,5mm
Sub-construction 50mm
Cross-glued boards x-lam 80mm
Sub-construction 50mm
Drywall board 12,5mm
Cross section thickness = 185mm

INTERNAL KNAUF SEPARATING Ci SOLID WALLS
2× Drywall board 12,5mm+12,5mm
Metal construction 50mm
Intermediate sound insulation 50mm
2× Drywall board 12,5mm+12,5mm
Cross section thickness = 100mm